14 February 2012

Bagaimana Memperlakukan Jam Automatic

If you wear your Automatic Watch daily, it is good to wind it once every two weeks with the crown to keep the wheels in motion and oil fluid. Only wind the crown until you meet a slight resistance.

If you do not wear your Automatic watch everyday, you should wind it at least twice a week to ensure continuous operation and to keep the inside mechanism in complete running order as well.

If you haven’t worn an automatic watch in a while, it is best to wind the stopped watch before putting it on. Ten to fifteen turns of the crown until you feel a slightly resistance is usually enough to give full power to the mainspring. Some companies recommend more: Breitling, for example, suggest turning the crown on its automatics 30 to 40 times. But be aware that the barrel in an automatic movement doesn’t have a hook so that you won’t feel any resistance when the mainspring is fully wound. Don’t worry; you will never overwind the watch.

Avoid setting the day and/or date at near midnight. This mechanism is activated during midnight and could be disrupted if set at this time.

If you are playing a sport requiring continuous arm motion, please try to avoid wearing your watch, since this kind of continuous motion could damage the movement.

Take your watch in every year or two to a competent watch repair shop for a maintenance (lube job). Most watches will function just fine with a lube and tune once every two years, although with today’s modern synthetic lubricants, most will run just fine for almost 4 or 5 years.


sumber http://www.messinajewelers.com
Perbedaan Jam Automatic dengan Jam Manual Winding/Putar Manual


Jam automatic adalah jam yang akan memutar sendiri per gulung sumber tenaganya melalui mekanisme pergerakan tangan yang akan memutar bolak balik rotor/bandul setengah lingkaran yang biasanya ada dibagian bawah, putaran rotor/bandul inilah yang akan menggulung per ulung dan lengtingan per gulung inilah yang nantinya akan menggerakkan jam.

Jam putar manual/manual winding justru tidak memiliki rotor seperti jam automatic, sehingga untuk menggulung per sumber energi pemutar jam, harus dilakukan dengan memutar crown/putaran jam langsung sebanyak beberapa putaran sehingga per gulung akan tergulung secara penuh.

Dengan penjelasan itu, sepertinya memang terkesan relatif lebih praktis jam automatic daripada manual winding, karena kita tidak perlu memutar jam, tinggal pake saja maka energi pemutar jam/per akan tergulung sendirinya.